Chromatography Autosampler Vial Inserts
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, 350ul fill volume with a conical point and 6x31mm outer dimensions. For use in 2ml autosampler vials. 1000/CS.
First hydrolytic, Class A, Type N51A, Borosilicate Glass. Features a conical tip for excellent performance. Residual volume is 4ul with most autosamplers. Spring may be required, sold separately, Can be used in 9mm Screw Top or 11mm Snap Top, 2ml 12x32mm autosampler vials. Lowest cost in class for budget minded labs.
Cap inserts for MTC Bio cryogenic vials, blue, 500/pk
MTC Bio cryogenic vials are designed to hold, store and preserve biological materials for days, weeks, years, or decades. These thick-walled tubes are outfitted with silicone O-rings that allow them to maintain their seal at temperatures as low as -196°C. Sterilized by gamma irradiation, the tubes are packed in reasealable bags of 50 tubes (10 bags per case) and are sterilzied by gamma. The self-standing starfoot base mates perfectly with a FREE included rack so that one hand is all that is need to install and remove caps. RNase, DNase, pyrogen, & endotoxin free
Microsolv Technology Corporation Inserts, in Racks with a Base. Includes 96, Clear, 1000ul Glass Low Volume Precision Inserts with wide conical points. For use in the Micro-Sample Management System. 1 EA.
Inserts are 1st Hydrolytic, Class A, TYPE 33 Borosilicate Glass made for use with the U-2D Micro-Sample Management System, Pre-Loaded in a Rack with a Base. These 1ml Inserts have a wide conical point for fast sample filling to minimize bubble formation and have outer dimensions of 7.72mm x 44.85mm. Sealing Film or Mats sold separately.
Microsolv Technology Corporation Inserts, in Racks. Includes 96, Clear, 350ul Glass Low Volume Precision Inserts with wide conical points. For use in the Micro-Sample Management System. 18/CS.
Inserts are 1st Hydrolytic, Class A, TYPE 33 Borosilicate Glass made for use with the U-2D Micro-Sample Management System or in 2ml, 12x32mm AQ Brand Autosampler Vials. These Inserts have a wide conical point for fast sample filling which minimizes bubble formation. Preloaded in Racks.
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, Deactivated, 350ul fill volume with a flat bottom and 6x31mm outer dimensions. For use in 2ml autosampler vials. 100/PK.
First hydrolytic, Class A, Type 33, Deactivated / Silanized Borosilicate Glass. Features a flat bottom. Residual volume is 6ul with most autosamplers. This product is manufactured in an ISO 9001:2015 Certified facility. Use with 9mm Screw Top or 11mm Snap Top 2ml, 12x32mm autosampler vials. Lower cost for budget minded laboratories.
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, 250ul fill volume with a flat bottom and 5x31mm outer dimensions. For use in narrow mouth, 2ml autosampler vials. 100/PK.
First hydrolytic, Class A, Type 33, Borosilicate Glass. Features a flat bottom. Residual volume is 3.5ul with most autosamplers. Springs are not required, recommended to use with 2ml, 12x32mm narrow mouth vials beginning with catalog number 9582S which have an 8mm thread. This product is manufactured in an ISO 9001:2015 Certified facility. Lowest cost in class for budget minded labs.
Microsolv Technology Corporation Inserts, in Racks. Includes 96, Clear, 350ul Glass Low Volume Precision Inserts with wide conical points. For use in the Micro-Sample Management System. 6/PK.
Inserts are 1st Hydrolytic, Class A, TYPE 33 Borosilicate Glass made for use with the U-2D Micro-Sample Management System or in 2ml, 12x32mm AQ Brand Autosampler Vials. These Inserts have a wide conical point for fast sample filling which minimizes bubble formation. Pre-Loaded in Racks.
Microsolv Technology Corporation Inserts, in Racks. Includes 96, Clear, 1000ul Glass Low Volume Precision Inserts with wide conical points. For use in the Micro-Sample Management System. 6/PK.
Inserts are 1st Hydrolytic, Class A, TYPE 33 Borosilicate Glass made for use with the U-2D Micro-Sample Management System. These 1ml Inserts have a wide conical point for fast sample filling to minimize bubble formation and have outer dimensions of 7.72mm x 44.85mm. Preloaded in Racks.
Leap PAL Parts L-MARK Brand Insert With bottom Spring, 6x31, 250 l, 100 Pack
L-MARK Brand Insert With bottom Spring 250 l Polypropylene 6x31mm 100 Pack(For use With Large Opening 2mL Vial). Made in the USA.
Leap PAL Parts La-Pha-Pack , Insert With Plastic Spring 100l 29x5.7mm 100 Pack. Made in Germany.
La-Pha-Pack , Insert With Plastic Spring 100¿l 29x5.7mm 100 Pack. Made in Germany.
Leap PAL Parts La-Pha-Pack , Insert, Micro-insert, La-Pha-Pack , 100l, 31x5mm, 100 Pack. Made in Germany.
La-Pha-Pack , Insert, Micro-insert, La-Pha-Pack , 100¿l, 31x5mm, 100 Pack. Made in Germany.
Microsolv Technology Corporation Insert 250Ul Silan Self Align
Inserts, Low Volume for Vials, Glass. Clear, Deactivated, 300ul fill volume with conical point and 6x31mm outer dimensions. Self aligning, for use in 2ml autosampler vials. AQ Brand. 100/PK.
Microsolv Technology Corporation Cap Mp Mod 4 Ptfe Insert Gl-45
Cap, Mobile Phase Delivery, Replacement. Blue, GL45 Threads and Open Hole. MicroSolv Brand. 1/EA.
Waters Corp Low Volume 6 x 29 mm Insert, 300 µL Volume, with Plastic Spring 100/pk
Vial inserts are a solution in applications where there is limited sample volume. Choose the appropriate volume insert for your sample volume and vial size.
